breadcum

Ribbon Blender Mixer

  • Home
  • Ribbon Blender Mixer

Salient Features

  • Single Speed Drive.
  • Available For Various Working Capacities Between 200 To 20,000 Liters.
  • Advanced Flush Bottom Discharge Valve Located In The Centre.
  • Worm Reduction Gearbox.
  • Suited For Atmospheric Operation .
  • Stainless Steel Surfaces Polished With Utmost Finesse. Exterior Walls Are Painted With Top-Notch Enamel Paint.
  • Three Phase Induction Motors Ideal For 415 Volts And 50 Hz.
  • Adequate Discharge Clearance Owing To The Blender Mounted On Supports.
  • Shaft Sealing Options Available As Per Your Specific Requirements. Gland Packing And Double Mechanical Seal Can Be Made Available Too.
  • Batch Size Based On 65% Of Blender Volume.
  • All Contact Parts In Stainless Steel 316.
  • Bearing Mounted On Lanterns Out Of The Mixing Zone To Avoid Cross-Contamination.
  • Feeding Through A Charging Port Mounted On Top Of The Blender.
  • Reduced Material Handling Due To Side Discharge Facility Of Processed Materials.
  • Monoblock Design Avoids Cross Contamination.
  • Meets All cGMP Standards.
  • Air Purge On The Side Entry Seals For Better Cross-Contamination Control.
  • Continuous Ribbon Design For Complete Discharge Of The Finished Product.
  • Variable Frequency Drive For Fine-Tuning The Shear Energy At Different Stages Of Blending.
  • The Shape Of Container And Mixing Stirrer Gives Sufficient Continuous Movement To The Powder / Granules Result In Good Quality.
  • All Contact Parts Are Made Out Of Ss304/Ss316 Quality Material, To Suit Customer Requirement.
  • Maximum Care Has Been Taken To Ensure Safe Operation Of The Unit.
  • Inching Facility For Ribbon To Facilitate Discharge Of Material.
  • Full Cover On Top Side Of The Trough.
  • Discharge Height Must Be Adjusted, If Confirm With Order.
  • Operating Panel Provided For Safe Operation Of Blender.
  • Centrally Located Material Discharge Valve.
  • Dust Proof Top Cover With Window Can Be Provided.
  • General Structure Completely Made Out Of Mild Steel & Painted In Standard Model & The Same Is Cladded With Ss304 In GMP Model.
  • Safety Guards & Covers Made Out Of SS 304 In GMP Model & Made Out Of Mild Steel In Standard Model.
  • Legs Made Out Of M.S & Painted In Standard Model & Same Will Be Cladded With Ss304 In GMP Model.

Technical Specifications

MODEL AIMS – RBM – 100 AIMS – RBM – 200 AIMS – RBM – 300 AIMS – RBM – 500 AAIMS – RBM – 1000
Working Capacity (Kg) 100 Kg 200 Kg 300 Kg 500 Kg 1000 Kg
Working Volume (Liter) Working Volume (Liter) 400 Liter 80 Liter 600 Liter 1000 Liter 2000 Liter
Gross Volume (Liter) 250 Liter 500 Liter 720 Liter 1230 Liter 2380 Liter
Discharge Size (mm) 100 mm 150 mm 150 mm 200 mm 200 mm
Discharge Height (mm) 500 mm 500 mm 600 mm 600 mm 600 mm
Overall Dimensions (mm) 950 X 490 X 600 1100 X 650 X 750 1150 X 770 X 900 1225 X 960 X 1150 1560 X 1200 X 1400
Ribbon Speed (RPM) 15 To 30 RPM 15 To 30 RPM 15 To 30 RPM 15 To 30 RPM 15 To 30 RPM
Electric Motor (HP / kW / RPM) 3 HP / 2.3 kW / 1440 RPM 5 HP / 3.7 kW / 1440 RPM 7.5 HP / 5.6 kW / 1440 RPM 10 HP / 7.5 kW / 1440 RPM 15 HP / 11.2 kW / 1440 RPM
Electrical Power Supply 230 Volts ± 10% Or 440 Volts ± 10% / 50 Hz Or 60 Hz / 3 Φ Phase / A.C. Power Supply